Fabricator Fitter Trainer

Position: Fabricator Fitter Trainer
Location: Lagos, Nigeria
Commence: June2011
Duration: 1year
Criteria:-

• Must speak fluent English
• Must have a strong outgoing personality
• Must have Trade Certification
• Prior teaching experience required
• Practical, on the job experience as a Plate Fitter is a must
• Knowledge of AFC drawings.
• Working knowledge of different steel sections preferred
• Substantial supervisory teaching experience in fabrication and erection methods.
• Must have hands on mentality
• Must be physically fit
• Strong and persuasive personality
• Ambitious and looking for a challenging work environment

Pipe Fitter Trainer

Position: Pipe Fitter Trainer
Location: Lagos, Nigeria
Commence: June2011
Duration: 1year
Criteria:-

• Must speak fluent English
• Must have a strong outgoing personality
• Must have Trade Certification
• Prior teaching experience required
• Practical, on the job experience as a Pipe Fitter is a must
• Knowledge of isometric drawing inclusive of P&ID’s
• Working knowledge of different metals preferred
• Substantial supervisory teaching experience in pipe construction and testing.
• Must have hands on mentality
• Must be physically fit
• Strong and persuasive personality
• Ambitious and looking for a challenging work environment

Welder Trainer

Position: Welder Trainer
Location: Lagos, Nigeria
Commence: June2011
Duration: 1year
Criteria:-

• Must speak fluent English
• Must have a strong outgoing personality
• Must have Trade Certification
• Prior teaching experience required
• Practical, on the job experience as a welder is a must
• Knowledge of AFC drawings and weld symbols.
• Working knowledge of different steel and pipe sections preferred
• Substantial supervisory teaching experience in all welding methods.
• Provide continuous improvement in the quality of ND welding capabilities
• Must have hands on mentality
• Must be physically fit
• Strong and persuasive personality
• Ambitious and looking for a challenging work environment

Senior Contract & Project Support Services

Position: Senior Contract & Project Support Services
Location: KualaLumpur, Malaysia
Commence: June2011
Duration: 18months
Criteria:-

• Must possess relevant Degree from recognized university
• 10years experience or more in O&G industries
• 10years experience or more in Procurement, Contracting Management
• Has work with operator with good performance report
• Familiar in using MS Office and SAP System
• Able to write and communicate in English

Mechanical Rotating Executive

Position: Mechanical Rotating Executive
Location: KotaKinabalu, Malaysia
Commence: June2011
Duration: 1year
Optional: 5months extension option
Criteria:-

• Minimum Diploma in engineering or equivalent
• 15years experience in hands-on turbine and driven equipment maintenance or equivalent
• Executing the major maintenance, repair and troubleshooting of critical-1 and critical-2 rotating equipment
• 5years experience as Turbomachinery Original Equipment Manufacturer (OEM) Field Representative (FSR)
• Able to lead a team and highly skilled in troubleshooting
• Able to write and communicate in English Language

Project Control Engineer

Position: Project Control Engineer
Location: Kuala Lumpur, Malaysia
Commence: June2011
Duration: 12months
Optional: 5month extension option
Criteria:-

• Possess a relevant degree from a recognized university or equivalent qualification
• 10years experience in Management of Drilling, Completion and Workover Materials
• Has experience in either planning or execution phases
• Has experience in Microsoft Project or equivalent
• Has involved in O&G upstream or downstream industries
• Moderate in English Language

SCM Sourcing Services Supervisor

Position: SCM Sourcing Services Supervisor
Location: Miri, Malaysia
Commence: June2011
Duration: 4months
Criteria:-

• SPM, MCE with computer literacy
• Qualification in Procurement Professional Certificate, Accounts or IT would be an added advantage
• 2years working experience

Frontend Engineer

Position: Frontend Engineer
Location: Brunei Darussalam
Commence: June2011
Duration: 23months
Criteria:-

• Degree in Process, Instrumentation, Mechanical, Electrical or other relevant engineering discipline
• Good knowledge in multi-discipline engineering will be an added advantage.
• 7years experience in O&G industries related work encompassing Appraisal, Conceptual, Frontend Engineering, Design, Construction, Commissioning
• 3years in Frontend/Conceptual Engineering, including well tie-in experience.
• Good inter-personal and communication skills
• Good team-working and negotiating skills

Buyer

Position: Buyer
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• HND or graduate recruits, on completion of a +12 months induction program.
• 10years experience in petrochemical industry
• Taking responsible for jobs in hand: safety, quality, progress, costs
• Role model for other designers
• Track record of delivery
• Ability to coach
• Usage of Intranet and SAP

Maintenance Supervisor

Position: Maintenance Supervisor
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• 10years experience in petrochemical industry
• Field personnel
• Taking responsibility for jobs in hand: safety, quality, progress, costs
• Role model for other supervisors
• Ability to coach
• Able to communicate in English, both verbally as well as in writing

Piping Designer

Position: Piping Designer
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• 10years experience in petrochemical industry
• 5years experience in O&G industries
• Planning authority based on years of field experience
• Taking responsible for jobs in hand: safety, quality, progress, costs
• Role model for other designers
• Track record of delivery
• Ability to coach

Mechanical Engineer

Position: Mechanical Engineer
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• 10years experience in petrochemical industry
• 5years experience in O&G industries
• Taking responsible for jobs in hand: safety, quality, progress, costs
• Role model for other designers
• Track record of delivery
• Ability to coach

Planner

Position: Planner
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• 10years experience in petrochemical industry
• 5years experience in O&G industries
• Planning authority based on years of field experience
• Taking responsible for jobs in hand: safety, quality, progress, costs
• Role model for other planners
• Track record of delivery
• Ability to coach

Material Procurement Analyst

Position: Material Procurement Analyst
Location: Brunei Darussalam
Commence: June2011
Duration: 1year
Criteria:-

• 10years experience in petrochemical industry
• Taking responsible for jobs in hand: safety, quality, progress, costs
• Role model for other designers
• Track record of delivery
• Ability to coach

Electrical Technician

Position: Electrical Technician
Location: Brunei Darussalam
Commence: Sep2011
Duration: 23months
Criteria:-

• Educated to BTech or equivalent in Electrical Engineering
• 5years experience in field of construction and commissioning of modern control and automation systems including fieldbus technology, petrochemical measurement and control installations.
• Demonstrate knowledge of requirements for equipment in hazardous areas
• Formal hazard management training e.g. risk assessment training.
• Sound troubleshooting skills.

Instrument Technician

Position: Instrument Technician
Location: Brunei Darussalam
Commence: Sep2011
Duration: 23months
Criteria:-

• Educated to BTech or equivalent in Instrument, Electronic Engineering
• 5years experience in field of construction and commissioning of modern control and automation systems including fieldbus technology, petrochemical measurement and control installations.
• Demonstrate knowledge of requirements for equipment in hazardous areas
• Formal hazard management training e.g. risk assessment training.
• Sound troubleshooting skills.

Mechanical Technician

Position: Mechanical Technician
Location: Brunei Darussalam
Commence: Sep2011
Duration: 23months
Criteria:-

• Educated to BTech or equivalent in Mechanical Engineering.
• 5years experience in field of construction and commissioning of static and rotating equipment.
• Demonstrate knowledge of requirements for equipment in hazardous areas.
• Formal hazard management training e.g. risk assessment training
• Sound troubleshooting skills

Senior Completion and Well Intervention Engineer

Position: Senior Completion and Well Intervention Engineer
Location: Sichuan, China
Commence: June2011
Duration: 2years
Criteria:-

• Supervise the in-field CWI activities i.e. Completion, Slickline, E-Line, Coiled Tubing, Frac Jobs, Well testing in accordance using the client process for constructing, maintaining wells.
• Maintain and – where required – develop procedures and work instructions for completion
  
• Manage Well Integrity, surveillance, intervention and maintenance of all new wells
• Maintain and manage Well Data and Integrity Management system.
• HSE Management responsibility for all activities carried out by the well intervention units assigned
• Management of interfaces with other departments contributing and/or supporting the new JV asset.
• Responsible for compliance with Client Wells Global Standards and Procedures and Change & Risk Management.

Industrial Hygiene Supervisor

Position: Industrial Hygiene Supervisor
Location: Miri, Malaysia
Commence: June2011
Duration: 3months
Criteria:-

• SPM, MCE certificate or equivalent with compulsory credits in Math and Science
• Diploma in Occupational Industrial Safety & Health
• 3years experience in the O&G industries

Metering Engineer

Position: Metering Engineer
Location: Brunei Darussalam
Commence: June2011
Duration: 23months
Criteria:-

• BSc in an engineering discipline
• 10years front end engineering experience
• Experience with the design of flow metering systems in upstream O&G service
• Good understanding of operability, maintainability and HSE constraints imposed on engineering designs
• High level cost estimating experience
• Able to effectively communicate across all levels of the interfacing departments and to management, including presentation skills
• Good report writing skills
• Self-motivated, delivering high quality, timely front end engineering work

Senior Frontend Engineer

Position: Senior Frontend Engineer
Location: Brunei Darussalam
Commence: May2011
Duration: 2years
Criteria:-

• Degree in relevant engineering discipline
• Charted Engineer status or equivalent with good knowledge in multi-discipline engineering will be an added advantage
• 10years experience in O&G related work encompassing Appraisal, Conceptual, Frontend Engineering, Design, Construction, Commissioning
• 5years in Frontend, Conceptual Engineering, including well tie-in experience.
• Good leadership skills and resource management capability
• Good interpersonal and communication skills.
• Able to effectively communicate across all levels of the interfacing departments and to management, including presentation skills
• Self-motivated, delivering high quality, timely frontend engineering work.

Lead Field Engineer Well Surface Facilities

Position: Lead Field Engineer Well Surface Facilities
Location: Brunei Darussalam
Commence: May2011
Duration: 2years
Criteria:-

• Degree in relevant engineering discipline
• Preferably of Charted Engineer status or equivalent with good knowledge in multi-discipline engineering.
• 10years experience in O&G related work encompassing design, construction, commissioning
• 5years in project engineering & management including well tie-in execution.
• Good leadership skills and resource management capability
• Good interpersonal and communication skills.
• Core discipline and project management training program.
• capable of working under considerable pressure whilst maintaining the ability to plan, co-ordinate, motivate and direct staff.

Project Controller

Position: Project Controller
Location: KualaLumpur, Malaysia
Commence: Jun2011
Duration: 12months
Criteria:-

• Possess a relevant Degree from recognize universities or equivalent qualification
• 10years experience in O&G industries
• Involved in implementing 2 or more O&G project
• Has experience in either Engineering or construction phases
• Has experience in using other Planning & Scheduling Software i.e Microsoft Project

Completion Service Engineer

Position: Completion Service Engineer
Location: Brunei Darussalam
Commence: May2011
Duration: 23months
Criteria:-

• Degree/HND or equivalent in an Engineering Disciplines
• Specialist technical knowledge must be obtained through special training
• 5years experience of subsurface techniques, operations and equipment
• 8years of relevant Well Services Operational experience at a supervisory level
• Good wireline and downhole knowledge
• Requiring well control certificate (IWCF Level 2 combine)
• Personal computing skills are essential and a working knowledge of Microsoft windows Applications e.g. Word, Excel, and PowerPoint and Electronic mail system

Material Coordinator

Position: Material Coordinator
Location: KualaLumpur, Kemaman, Labuan, Malaysia
Commence: Aug2011
Duration: 16months
Criteria:-

• Below 50years old
• Minimum SPM or equivalent
• 5years experience in management of drilling, completion and workover materials
• Has experience with Operator with good performance report
• Able to write and communicate in English
• Knowledge in SAP R3 MMM or Lotus-based or Microsoft Software System
• Valid offshore medical certificate and valid HUET & Sea Survival certificate
• 4years experience as Logistic & Material Coordinator with operator in drilling, completion and marine operations
• 10years experience to operator and contractor HSE policy and procedures

Material Coordinator

Position: Material Coordinator
Location: KualaLumpur, Malaysia
Commence: May2011
Duration: 12months
Criteria:-

• Below 50years old
• Minimum SPM or equivalent
• 5years experience in management of drilling, completion and workover materials
• Has experience with Operator with good performance report
• Able to write and communicate in English
• Knowledge in SAP R3 MMM or Lotus-based or Microsoft Software System
• Valid offshore medical certificate and valid HUET & Sea Survival certificate
• 4years experience as Logistic & Material Coordinator with operator in drilling, completion and marine operations
• 10years experience to operator and contractor HSE policy and procedures

Structural Welding Inspector

Position: Structural Welding Inspector
Location: Onshore Bintulu, Malaysia
Commence: June2011
Duration: 9months
Optional: 6months extension option
Criteria:-

• Below 55 years old
• 5years experience in welding inspection preferably in fabrication and construction of O&G onshore and offshore facilities e.g. tank, structural, vessel & piping
• Good knowledge on the welding procedures and standards
• Valid CSWIP 3.1 certificate or equivalent
• Worked in at least 1 live plant environment
• Minimum SPM or high school level
• Valid NIOSH O&G safety passport (OGSP)
• Valid passport NIOSH confined space entry and authorized entrant, standby person passport

Well Services Engineer

Position: Well Services Engineer
Location: Offshore Sarawak, Malaysia
Commence: May2011
Duration: 58days
Optional: 1month extension option
Rotation: 28days per rotation
Criteria:-

• Minimum qualification of high school certificate
• Client prefer either Malaysian or regional expatriates (southest Asian region)
• 15years work experience in O&G industries
• 10years experience as well services, intervention and testing supervisor
• 5years experience at offshore environment, preferable at offshore Malaysia.
• 7years experience in slickline operation
• 2years experience in well testing and familiar with Coiled Tubing Unit (CTU) operation.

Contracts Engineer

Position: Contracts Engineer
Location: Brunei Darussalam
Commence: May2011
Duration: 1year
Criteria:-

• University graduate in Business studies or equivalent, Engineering or Quantity Surveying
• 5years experience as Contracts Engineer in drafting & administering of contracts in engineering or O&G industries
• Ability to manage Contracts section independently and sound knowledge of systems and procedures
• Good communication skills, with the ability to develop effective business relationships both within and outside functional boundaries
• Ability to work independently within a multi-disciplined team
• Good sense of commercial awareness

Project Material Coordinator

Position: Project Material Coordinator
Location: Brunei Darussalam
Commence: May2011
Duration: 23months
Criteria:-

• HND or BSc in Engineering, Business Management or similar or Membership grade of UK CIPS
• Proficient use of standard desk top tools e.g e-mail, MS Word, MS Excel, MS Power point
• Competent in using SAP
• 15years experience in the O&G industries including a number of years in a buying, PMC or project support role or engineering environment
• Very Good co-ordination and communication skills
• Good understanding of fabrication process
• Knowledge of materials specification
• Demonstrate an appropriate understanding of interface with logistics and achieve optimum utilisation of logistic resources

HSE Officer

Position: HSE Officer
Location: Onshore Sabah, Malaysia
Commence: May2011
Duration: 1year
Optional: Yearly extension option
Criteria:-

• Valid safety and health officer certificate or equivalent issued by DOSH and NIOSH
• BSc Engineering Degree, diploma or certificate
• 10years in O&G major onshore project, fabrication yards, offshore oil fields
• Valid medical certificate
• extensive experience in Project HSE Planning execution, control and monitoring in onshore project, fabrication yard or offshore platform and managing subcontractors at project site
• Have worked 2 major onshore projects
• Fluent in oral and written English
• Computer literate
• Write, communicate clear & comprehensive verbal reports and instructions

QAQC Engineer

Position: QAQC Engineer
Location: Onshore Sabah, Malaysia
Commence: May2011
Duration: 1year
Optional: Yearly extension option
Criteria:-

• Degree in mechanical, electrical or electronic engineering discipline
• 10years in O&G Construction
• Valid medical certificates
• Review QAQC related procedures e.g Welding procedure Specification (WPS), Inspection Test Plan (ITP), Non Destructive Procedures (NDT)
• Evaluate subcontractor's quality performance
• Conduct failure investigation works, plan testing, inspection and evaluate results and provide recommendations
• Established informative database and provide technical input to Design, Construction, Procurement, Testing and Commissioning
• Provide total technical integrity solutions and expertise through technical review, compliance, check strategies, philosophies, standards and specifications
• Provide assistance, input to CSR on the progress, change orders and site safety surveillance
• Have worked 2 major onshore projects
• Fluent in oral and written English
• Computer literate
• Write, communicate clear & comprehensive verbal reports and instructions

Construction Engineer

Position: Construction Engineer
Location: Onshore Sabah, Malaysia
Commence: May2011
Duration: 1year
Optional: Yearly extension option
Criteria:-

• Degree in mechanical, electrical or electronic engineering discipline
• 10years in O&G Construction
• Valid medical certificates
• Have worked in 2 major onshore projects
• Fluent in oral and written English
• Computer literate
• Write, communicate clear & comprehensive verbal reports and instructions

Project Manager

Position: Project Manager
Location: Onshore Sabah, Malaysia
Commence: May2011
Duration: 1year
Optional: Yearly extension option
Criteria:-

• Degree in mechanical, electrical or electronic engineering discipline
• Preferably of Chartered Engineer status or equivalent with good knowledge in multi discipline engineering
• 5years experience in O&G related work design, construction, commissioning and Project Management
• Energetic and possess leadership quality
• Good interpersonal and communication skills

Rigging, Sligging & Scaffolder Trainer

Position: Rigging, Sligging & Scaffolder Trainer
Location: Miri, Malaysia
Commence: May2011
Duration: Permanent
Criteria:-

• Instructor for offshore crane operator, rigging & slinging, scaffolding
• Able to speak and write English
• Familiar with HSE practices
• Possess instructional technique

Project Engineer

Position: Project Engineer
Location: Brunei Darussalam
Commence: May2011
Duration: 2years
Criteria:-

• Degree in engineering mechanical or civil or HND with equivalent relevant work experience
• 10years industrial experience in project engineering
• Knowledge in SAP system is beneficial
• Prepares and submits project proposal, plans and budget for approval
• Supervises engineering contracts
• Authorised to initiate Incident Reports and close out individual actions
• Approves relevant QAQC forms and engineering documents

Logistic Manager

Position: Logistic Manager
Location: Chengdu, China
Commence: May2011
Duration: 1year
Criteria:-

• Direct all aspects of logistics functions of inland Transportation
• Lead the Logistics team in delivering the logistic needs of the Venture integrated development plan
• Ensure local activities meets all vehicle standards and specifications
• Prepare and balance department budgets
• Motivate staff and develop high performers to meet their potential
• Review and direct audits of the contractor vehicles safety inspection schedules
• Manage the investigation of logistics incidents and subsequent reports to management
• Arrange defensive driver training

Specialist Rigger

Position: Specialist Rigger
Location: Offshore Bintulu, Malaysia
Commence: May2011
Duration: Call-out basis
Criteria:-

• 2years experiences in O&G industries under offshore environment
• Have working experience in flexible hose installation and handling offshore facilities
• Physically and medically fit to work in harsh offshore environment
• Have valid sea survival training and medical certificates

Specialist Rigging Supervisor

Position: Specialist Rigging Supervisor
Location: Offshore Bintulu, Malaysia
Commence: May2011
Duration: Call-out basis
Criteria:-

• 5years experience in the O&G industries under offshore environment
• 2years experience in supervisory level
• Have working experience in flexible hose installation and handling offshore facilities
• Physically and medically fit to work in harsh offshore environment
• Valid Sea Survival training and medical certificates